Posts

Showing posts from April, 2010

St. Ignatius - Lettering and Sealing

Image
The lettering on the book is now burned and some sealer has been applied. On the left side of the book it says in Latin "Constitutiones Societatis Jesu" which in English would be "Constitutions of the Society of Jesus." On the right side is "Ad majorem Dei gloriam" which is the motto of the Society of Jesus (commonly called the Jesuits.) The motto is also in Latin and translates to "For the greater glory of God."

St. Ignatius - Progress Photos 360 Degrees

Image
A lot of progress has been made on the St. Ignatius statue . I realized that I have only posted photos from the front so far. So, here are some pictures from different angles. Please let me know if you have any constructive criticism.

Testing Tool Sharpness Before Making That Cut

I was just about to make a fine detail cut with a tool I have not used in a while. I had second thoughts. What if this tool is not perfectly sharp? The cut will be cross grain and a dull tool would tear the wood fibers requiring me to re-carve the entire surrounding area. The point is, be sure you have a scrap piece of wood you can test your tools on first. It turns out that the tool was sharp, but I'm still glad I checked first. Do you ever test your tools before making a cut?

St. Ignatius - Progress Photos Number 3

Image
We are at the stage where a lot of work is being done, but it may be difficult to tell from the photos. A good deal has been done forming the back. The base, book and feet have been shaped up.